[Castor-users] How to apply 'time resolution (200 ps)' and 'random&scatter correction' to the offset detector

[Shwan K]

Dear Thibaut, 
Thank you for your answer.
 
I will explain in more detail.
So far, I have used the "-TOF_reso" option when simulating a traditional 1-layer crystal detector with a 'cylindricalPET'.
 
But the situation is different now.
I tried to perform offset detector image reconstruction with 'cylindricalPET', but I found that 'cylindricalPET' offset detector could not reconstruct CASTOR images.
Therefore, 'systemType' is performing offset detector simulation using 'PETscanner'. Therefore, I have to make my own cdf and cdh files without using 'castor-GATERootToCastor'.
 
Therefore, I checked 'Table 3' of CASToR_general_documentation and I am going to try image reconstruction.
But it's hard for me to understand 'Table 3'.
I don't know what data output from 'GATE Coincidence output' should be used for scatter correction, random correction and TOF image reconstruction.
 
I'm sorry I couldn't tell you the details of the previous question.
If you don't have enough explanation, please ask me again.
And I would appreciate it if you could let me know if there is any other way other than "PETscanner."
Thank you. I look forward to hearing from you.
 
 
-----Original Message-----
From: "tmerlin"<Thibaut.Merlin at univ-brest.fr>
To: <castor-users at lists.castor-project.org>;
Cc:
Sent: 2022-03-08 (화) 01:00:38 (GMT+09:00)
Subject: Re: [Castor-users] How to apply 'time resolution (200 ps)' and 'random&scatter correction' to the offset detector
 
Dear Suhwan,

Using the GATE to CASToR tool, you can use the "-TOF_reso" option in order to enable TOF and set a time resolution corresponding to the CRT.
Regarding scatter and random correction, the tool just computes scatter/random rate according to the acquisition and doesn't perform real scatter and random corrections. If you want to perform these corrections, you will have to compute them yourself. Alternatively, you can choose to ignore scatter and random and only convert the trues with the -t option.

Hope this helps,
Thibaut

On 07/03/2022 12:47, Shwan K wrote:

Dear CASToR Users and Developers, 
 
Hi I am Suhwan Kim
 
I designed the offset detector of 'PETscanner' using the GATE tool.
I want to apply 'time resolution (200 ps)' and 'random&scatter correction' when performing image reconstruction.
I don't know how to proceed.
can you help me??
 
Thanks
 
Suhwan Kim




_______________________________________________ Castor-users mailing list Castor-users at lists.castor-project.org https://lists.castor-project.org/mailman/listinfo/castor-users To look for something in the mailing-list archives, use the search box at: https://castor-project.org/mailing-list
-- Thibaut MERLIN -- PhD Docteur en Imagerie Médicale au Laboratoire de Traitement de l'Information Medicale (LaTIM - INSERM UMR 1101) Institut Brestois de recherche en Bio-Santé (IBRBS) 12 Avenue Foch, 29200 Brest, FRANCE Tel: 06.75.12.24.90
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.castor-project.org/pipermail/castor-users/attachments/20220308/680a5a70/attachment.html>